approved iso

Baler Manual

Baler manual is a operation guideline to better understand this baler machine and corresponding knowledge. So it is very important for the operator who use the machine firstly. The correct operation and maintenance can improve the baler performance and save maintenance cost in future.


What contents baler manual have?

Normally baler manual has below information for better understanding of this machine.

  1. – Instruction

Normally it is a simple manufacturer introduction and advises. So you can get a general idea about the company or machine.

  1. – Use of machine and warranty

This part tells you the points you should be careful in the use of machine. Also it clears the warranty conditions and period.

  1. – Safety instructions

General safety information lists some typical cases that you should be careful. Also it clearly explains the warnings and warning labels. A safety checklist can help you to check all the signs and warnings, items before operation, and items during the operation.

  1. – Baler machine technical data

The specifications and features of the baler are all available in this part. You can also expect overall machine layout, electrical box layout and control panel layout from here.

  1. – Operation instructions

Operation instructions especially some difficult parts are collected in this part. For example, you can see fully automatic horizontal baler‘s control panel and touchscreen operation guideline in detail here.

  1. – Trouble shooting

For some common glitches you may encounter, here are possible reasons and solutions for easy reference. For example, the threader is out but the twister does not rotate. Possible reason is that the A.C. contactor is damaged or the voltage is not up to 3 phase. So you should replace a new contactor.

  1. – Maintenance

To ensure maximum output and extend the life-span of the machine, routine preventive maintenance is of high importance. Here lists some maintenance suggestions.

  1. – Drawings

Electrical diagrams and hydraulic diagrams are both available here. So you can check it easily in case you have any electrical or hydraulic questions.


Quick links:

Baler FAQ and knowledge

PROSINO shredders and granulators