This open-end manual-tie horizontal baler with wire threader has all functions that a fully automatic horizontal baler only except for the auto-tying mechanism. Although tying has to be done manually, wire/belt threading can be automatically pushed into the strapping slots by the threading mechanism installed on this machine, while a normal manual-tie horizontal baler doesn’t have such threading mechanism. Comparing between a fully automatic baler and this semi-automatic baler of same pressure force and same chamber size, productivity of this machine is more or less 20% less. However, a very big advantage of this machine compared to a fully automatic baler is that is the tying material is completely flexible but not limited to steel wire only. You can use steel wire, PET belt, plastic rope, hemp rope etc. to tie the bales.
For production facilities that have large volume of solid waste internally generated and thus require efficient way of baling the waste or for middle-scale recycling facilities, this series baler is very suitable choice. It is much more efficient than a normal manual-tie baler and meanwhile is very labor-saving. In addition, the cost is not as high as a fully automatic baler, which is helpful for recyclers who don’t have sufficient budget to invest on a fully automatic baler. Besides, this series machine is ideal choice for plants of animal bedding and feeding material to compress their fluffy material, because they usually require plastic tying for the bales but not steel wire so as to make sure the bales have zero containing of sharp ferrous items that can hurt the animal.
The machine can handle almost all types of solid waste, including paper, cardboard, plastic, film, fiber, etc. However, due to the open-end(exit) design, we do not much recommend it handling plastic bottles & containers because the bales produced by this machine will not be so dense for these high rebounding products. The ideal for handling these material is a close-end baler.
Baling Press Application For Open-end Manual-tie Horizontal Baler With Wire Threader:
Cardboard (OCC), paper, carton boxes, plastic film, plastic bags, hay, straw, scrap textile, waste fiber, etc.
Choose from our various models available, or contact us for a customized baling solution. View shredders.
The following machine can bale:
Aluminum Can Animal Fiber (Rabbit fur, Wool, Hair) Cardboard (OCC, Carton) Cellulose Fiber Chopped Straw / Hay Coffee Husk (Coffee Grain Peel) Compost (eg. Organic Fertilizer) Cotton Pulp Cotton Seed Disposable Tableware Foam (Sponge) Hard Plastic Shell Hollow Plastic (PET Bottle, HDPE Jar, PP Container) Hops Leaves Medical Waste Mineral Cotton Fiber (Asbestus) Paper (ONP, OMG, Kraft Paper) Peanut Shell Plant Fiber (Coconut / Coir Fiber, Palm Fiber, Abaca Fiber) Polyurethane Powder Rice Husk / Rice Hull Sawdust Shredded Paper Soft Plastic (eg.Plastic Film, Plastic Bag) Synthetic Fiber (Polyester Fiber) Textile (Used Clothes, Wiper Rag, Quilt, Pillow, Towel, Shoe, Carpet) Un-chopped Straw / Forage / Hay (Rice / Wheat Straw, Corn Silage, Alfalfa,Lucerne) Urban Waste Wood Shaving / Chip
| Model | Bale size | Bale weight for OCC | Throughput | Strapping | ||
|---|---|---|---|---|---|---|
| Length | Width | Height | ||||
| SHB1-TO-400 | Adjustable mm ( inch) |
720 mm (28 inch) |
800 mm (31 inch) |
200-350 kg (440-770 lbs) |
1-2 Ton/h |
Steel wire |
| SHB1-TO-600 | Adjustable mm ( inch) |
1100 mm (43 inch) |
800 mm (31 inch) |
350-700 kg (770-1540 lbs) |
3-4 Ton/h |
|
| SHB1-TO-1000B | Adjustable mm ( inch) |
1100 mm (43 inch) |
800 mm (31 inch) |
400-800 kg (880-1760 lbs) |
7-8 Ton/h |
|
| SHB1-TO-1200A | Adjustable mm ( inch) |
1100 mm (43 inch) |
1100 mm (43 inch) |
600-1200 kg (1320-2640 lbs) |
8-9 Ton/h |
|
| SHB1-TO-1200B | Adjustable mm ( inch) |
1100 mm (43 inch) |
1100 mm (43 inch) |
600-1200 kg (1320-2640 lbs) |
11-13 Ton/h |
|
Main Features
 |
Wire/Belt Threading Mechanism automatically pushes the tying wire or belt into the strapping slots, greatly increases operation efficiency |
|
Cutting blades on Feeding Aperture for cutting off the excessive material to prevent it from getting stuck at the feeding mouth |
|
Bale Exit Platform for receiving the bales ejected from the machine and providing convenience for removing the bales with a forklift |
|
Feed Conveyor is Optional to be connected with the baler for automatic feeding |
