Home | Blog |
Customized Rear-Loading Vertical Baler for PET Bottles and Industrial Waste
Customer Inquiry: Heavy-Duty Vertical Baler with Rear-Loading Configuration
A customer looking for a heavy-duty vertical baler for processing PET bottles and industrial waste contacted SINOBALER to explore customized feeding options.
One of the customer's key requirements was a rear-loading (back-feed) configuration. They wanted to know whether SINOBALER could supply a heavy-duty vertical baler with a rear feeding arrangement or an equivalent solution that would allow materials to enter the compression chamber from the back of the machine.
In particular, the customer was interested in a feeding arrangement that could potentially be connected to an infeed conveyor, reducing the need for manual loading.
SINOBALER Solution: Customized Rear-Loading System
SINOBALER proposed a customized rear-feeding solution for its heavy-duty dual-ram vertical balers.
The proposed design involves adding a dedicated rear infeed port with a feeding hopper at the back of the machine. This arrangement allows materials to be introduced into the compression chamber from the rear rather than through the conventional front feeding door.
If the customer intends to connect an infeed conveyor, the rear hopper can serve as the material transfer interface, subject to confirmation of the conveyor dimensions and feeding arrangement.
Key Modifications for Rear Feeding
To accommodate the customized rear-loading configuration, several structural and mechanical modifications are required:
1. Rear Infeed Port with Hopper
A customized feeding opening and hopper are installed at the rear of the baler to facilitate material loading from the back of the machine.
2. Increased Compression Chamber Height
The height of the compression chamber needs to be increased by approximately 300 mm to accommodate the rear-feeding structure.
3. Upgraded Hydraulic Bale Ejector
The standard chain-type bale ejector is replaced with a hydraulic bale ejector. A hydraulic cylinder is incorporated into the ejecting system to provide the required bale discharge movement.
These modifications allow the vertical baler to accommodate the customized rear-feeding arrangement while maintaining its heavy-duty compression and bale-ejection functions.
Compatible Heavy-Duty Vertical Baler Models
SINOBALER can provide the customized rear-loading option for its heavy-duty dual-ram vertical balers, including:
SVB2-T-1500 Heavy-Duty Dual-Ram Vertical Baler
SVB2-T-2000 Heavy-Duty Dual-Ram Vertical Baler
The rear-feeding configuration can be incorporated into either model according to the customer's material characteristics, feeding requirements and installation layout.
The customized rear-loading system is an optional configuration and involves additional costs compared with the standard machine.
What Information Is Needed for a Rear-Loading Vertical Baler?
To finalize the design and recommend the most suitable configuration, SINOBALER would need to confirm:
- Materials to be processed, such as PET bottles or industrial waste.
- Expected processing capacity or daily material volume.
- Whether materials will be fed manually or by an infeed conveyor.
- Conveyor dimensions, discharge height and feeding direction, if applicable.
- Available installation space behind the baler.
- Required bale dimensions and approximate bale weight.
This information helps our engineering team determine the appropriate rear hopper dimensions, compression chamber structure and hydraulic bale-ejection arrangement.
Looking for a Customized Rear-Loading Vertical Baler?
Not every recycling facility has the same material-handling layout. When conventional front feeding is inconvenient or incompatible with an existing conveyor system, a customized rear-loading configuration can provide a practical alternative.
SINOBALER offers customized heavy-duty vertical baling solutions, including rear infeed ports, feeding hoppers and hydraulic bale-ejection systems.
Contact SINOBALER to discuss your rear-feeding requirements and obtain a customized quotation.
Email: inquiry@sinobaler.com
Website: https://www.sinobaler.com
Our engineering and sales teams will work with you to evaluate your feeding arrangement and recommend a suitable vertical baler configuration.
Related Information
Learn more about different feeding arrangements for balers:
Different Baler Feeding Methods – Explore manual feeding, conveyor feeding, forklift loading, hopper feeding and other material-feeding configurations.
Other Blogs
Steps for Feeding Materials into a Baler
2025/02/18
Feeding waste material into a baler is an important step in the baling process, and it needs to be done efficiently to ensure proper compression and maximize the effectiveness of the machine. The method of feeding can vary depending on the type of baler and the material being processed. Here are the general steps for
Different Baler Feeding Method
2016/05/26
Material feeding is the first step to make bales in a baling press machine. Feeding by hand is a very slow and labor cost way. It is usually used for vertical balers and small volume of waste material handling. However, most recyclers need efficient ways of feeding instead of manual feeding. SINOBALER baler feeding systems […]
Vertical Baler with Conveyor Feeding
2016/02/22
When using conveyor to feed balers, most people will think of horizontal balers. It is true that vertical balers are usually with front loading door and need to be fed manually, but a vertical baler can also be built to work together with conveyor feeding system by making some modifications. As an experienced baler manufacturer, SINOBALER […]
Related Videos
Other Blogs
Steps for Feeding Materials into a Baler
2025/02/18
Feeding waste material into a baler is an important step in the baling process, and it needs to be done efficiently to ensure proper compression and maximize the effectiveness of the machine. The method of feeding can vary depending on the type of baler and the material being processed. Here are the general steps for
Different Baler Feeding Method
2016/05/26
Material feeding is the first step to make bales in a baling press machine. Feeding by hand is a very slow and labor cost way. It is usually used for vertical balers and small volume of waste material handling. However, most recyclers need efficient ways of feeding instead of manual feeding. SINOBALER baler feeding systems […]
Vertical Baler with Conveyor Feeding
2016/02/22
When using conveyor to feed balers, most people will think of horizontal balers. It is true that vertical balers are usually with front loading door and need to be fed manually, but a vertical baler can also be built to work together with conveyor feeding system by making some modifications. As an experienced baler manufacturer, SINOBALER […]
Media and Gallery
Follow us
PRIVACY POLICY
We collect information from you when you fill out an inquiry or contact form. When submitting the form on our site, you may be asked to enter your name and contact details such as: e-mail address, mailing address and/or phone number, etc. Alternatively, you can choose not to complete our forms and visit our site anonymously. Any of the information we collect from you may be used to help us to better respond to your individual needs, and/or enable us to more effectively respond to your customer service requests and support needs. The email address you provided may also be used to send you information and updates pertaining to your inquiry and/or order, in addition to receiving occasional company news, updates, related product or service information, etc. SINOBALER does not sell, trade, or otherwise transfer to outside parties your personally identifiable information. This does not include trusted third parties who assist us in operating our website, conducting our business, or servicing you, so long as those parties agree to keep this information confidential. We may also release your information when we believe release is appropriate to comply with the law, enforce our site policies, or protect ours or others rights, property, or safety.
By using our site, you consent to our online privacy policy. If we decide to change our privacy policy, we will post those changes on this page. If you have any questions or concerns regarding our privacy policy, please e-mail info@sinobaler.com or mail your question to us at 1206 Yinzhou Shanghui Nan Lou, 1299 Yinxian Avenue, Yinzhou District, Ningbo 315192, P.R. China.
EXTERNAL LINKS & DISCLAIMER
Our web site has links to many other organizations with their permission. Upon leaving the SINOBALER web site, you are subject to the privacy policy of the new site which are not under our control. SINOBALER is not responsible for the content of any linked site or any link contained in a linked site. These links are provided to you as a service for you to better understand the different business relationships that SINOBALER has established, and/or to point the reader to other possible relevant resources.