Wire-Tied or Strap-Tied Bales


Wire-Tied or Strap-Tied Baling Solutions

Wire-tied or strap-tied baling is one of the most widely used methods for recycling and waste management. After compression, the bale is secured with metal wires or plastic straps to maintain its shape during handling, storage, and transportation.

Key Features

  • High bale density and stable bale shape

  • Suitable for large-volume material processing

  • Easy stacking, storage, and transportation

  • Available with manual, semi-automatic, or fully automatic tying systems

  • Different tying methods and bale sizes available according to material requirements

Typical Materials

Recommended Equipment

  • Vertical balers

  • Semi-automatic horizontal balers

  • Fully automatic horizontal balers

  • Heavy-duty dual-ram balers

SINOBALER provides customized wire-tying and strap-tying balers for businesses ranging from small recycling facilities to large-scale recycling plants.

Read more

Strapping means
Feeding method
Strapping Material
condition:
clear condition

Heavy Duty Dual Ram Baler


The Sinobaler Heavy Duty Dual Ram Baler delivers 80–200 tons of press force via its dual-ram system, ideal for compacting tough, fibrous, or rebounding materials, as well as soft ones requiring high bale density for optimized loading. It's perfect for natural and synthetic fibers, metal panels, tubes, profiles, and hard plastics like electronics shells and pipes. This baler reduces storage space, cuts transport costs, and boosts efficiency—making it a smart investment for modern recycling and waste handling.

Heavy Duty Baler for Fluffy Material (eg. Heavy Duty Fiber Balers)


These down stroke, manual tie, and feed balers are ideal for fiber recycling where labor is cost-effective. Depending on operator efficiency, throughput can reach up to 5 bales per hour. Sinobaler’s fiber balers offer a 15:1 compression ratio and 1100×700×600 mm bale size, with adjustable bale sizing and up to 120 bales per 40ft container. For custom machines or advanced models, contact our sales team. Auto-tie and conveyor-fed horizontal balers for higher output are also available.

Four Door Opening Baler


Sinobaler’s four door opening baler is perfect for compressing used clothes, fabrics, fibers, rags, cotton, and wool. Ideal for textile makers, clothing recyclers, exporters, and rag graders, it produces dense bales from 65lbs to 990lbs with up to 80 tons of force. Its vertical design saves space and allows one-person operation, making it cost-friendly even for small shops. The four-door system ensures easy wrapping and cross-strapping, creating tight, protected bales for efficient storage and transport.

Optimized Heavy Duty Baler for High Rebound Material (eg. Tyre Balers )


The optimized tire baler from Sinobaler is a heavy-duty vertical machine designed to compact high-rebound materials like recycled tires into dense bales. Upgraded with a stronger hydraulic system and better cooling, it produces one bale of 120–140 car tires in just 7 strokes with a fast 35-second cycle time. This tire baler reduces tire volume for easier storage and transport, helping recyclers save space and costs. It fully meets safety standards, is simple to operate, and fits perfectly in tire recycling plants or tire manufacturing facilities thanks to its space-saving vertical design.

Standard Heavy Duty Baler for High Rebound Material (eg. Tire Balers )


"High rebound" materials like tires require a strong baler to counter their elastic nature. The Sinobaler tire baler is designed for tire dealers and recycling facilities to reduce tire disposal costs by minimizing storage and transport needs while producing valuable, tightly packed bales for resale. The SVB2-TB-1000 model creates dense bales of 120–140 car tires in just 9 strokes, achieving a 12:1 compressing ratio with up to 1200 kg per bale. These bales are reused in construction, road building, drainage, and landscaping, promoting efficiency, cost savings, and environmental responsibility.

Lifting Chamber Baler / Textile Baler / Clothes Baler


A lifting chamber baler, also called a used clothes or textile baler, is ideal for textile waste recycling. It's perfect for textile manufacturers, used clothing recyclers, second-hand shops, exporters, and rag graders. The lifting chamber design simplifies strapping, wrapping, and bale ejection for easy one-person operation, cutting labor costs. Bale weights range from 30kg to 600kg with up to 150 tons of force. For higher efficiency, the twin lifting chamber model allows simultaneous feeding and baling.

Swivel Twin Lifting Chamber Baler


The Swivel Twin Lifting Chamber Baler features a modern design and advanced engineering, making it an efficient solution for textile waste handling. It has two chambers connected by a central pivot—one chamber loads materials while the other compresses, bales, and straps them. This synchronized operation balances loading and processing, improving productivity. When a bale reaches its set compression, the chamber lifts automatically, signaling cycle completion and reducing downtime. Ideal for textile waste exporters and used clothing dealers, this baler offers efficiency, user-friendliness, and labor savings.

Long Stroke Baler (eg. Hollow Plastic Baler, PET Bottle Baler, Aluminum Can Baler)


The long stroke baler is ideal for compacting plastic bottles (like PET) and aluminum cans into tight, manageable bales. This vertical hydraulic press is designed for long-stroke compression, combining baling and draining in one step with a liquid tray that collects residual fluids, keeping recycling areas clean and safe. It can produce bales up to 770 lbs, depending on material density, with a volume reduction ratio up to 25:1 for maximum compaction. SINOBALER offers various models and chamber sizes to meet different business needs for baling hollow products.

Manual Tie Horizontal Baler


Sinobaler’s Manual Tie Horizontal Baler, also called a semi-automatic horizontal baler, handles solid and hollow waste like cardboard, PET bottles, textiles, and more. Ideal for facilities processing under 4 tons/hour with low labor costs, it offers automatic feeding, compressing, door control, and bale ejection—only the tying is manual. Press force ranges from 40 to 120 tons, with bale weights from 200kg to 850kg. Custom chamber sizes, power packs (up to 45kW), and conveyor options are available to boost productivity up to 5 bales/hour.

Open-end Manual-tie Horizontal Baler


Sinobaler SHB1-O series open-end manual-tie horizontal baler features an open-end design for continuous bale output, improving productivity by 50% over close-end balers. Strapping setup is needed only once, saving labor like a fully automatic baler. It supports various strapping materials—steel wire, PET strap, rope, etc.—making it ideal for high-volume solid waste or biomass baling. Not suited for hollow plastics due to lower density. A cost-effective choice for mid-scale recyclers or facilities needing efficient, labor-saving baling with limited investment.

Open-end Manual-tie Horizontal Baler With Wire Threader


This open-end manual-tie horizontal baler with wire threader offers nearly all functions of a fully automatic baler—except automatic tying. The built-in threading mechanism pushes wire or belt into strapping slots automatically, unlike standard manual-tie balers. While its productivity is about 20% less than a full-auto baler of the same size, it allows flexible strapping materials like steel wire, PET belt, or rope. Ideal for medium-scale recyclers or producers of solid waste, animal bedding, or feed who need efficient, cost-effective baling without sharp metal in bales. Best suited for soft or solid waste, not hollow plastic containers.

Fully Automatic Horizontal Baler


Sinobaler’s fully automatic horizontal baler (20–120 tons pressure) processes up to 15 tons/hour, ideal for high-volume recyclers handling cardboard/OCC, paper, plastic film, textile waste, and more. As our flagship open-end auto-tie baler, it features Mitsubishi PLC control, remote support, and simple operation. Bale weight/length is programmable via a touch screen for optimized container loading. The SHBA2-1200 model produces dense 1200kg rectangular bales, easy for transport/storage. CE-compliant with safety interlocking, SHBA2 is the perfect solution for large-scale soft waste recycling.

L-type Two Ram Automatic Horizontal Baler


The L-type two ram automatic horizontal baler is ideal for baling a wide range of recyclable waste. Compared to single ram balers, it offers greater versatility, supports both wire and plastic strapping, and produces high-density bales thanks to its separate strapping unit. Its flexible design can include features like a pre-compression lid to prevent cutting sensitive materials like textiles. Perfect for high-volume recycling centers, fodder exporters needing plastic straps, and municipal waste handlers seeking to avoid jams common in single ram balers.

Cardboard Baler (eg. Mill Size Baler)


The standard mill size baler is one of Sinobaler’s most popular vertical baling machines, ideal for handling cardboard and carton waste. Also known as a cardboard or carton baler, it suits recycling centers, cardboard manufacturers, supermarkets, stores, and print shops generating large cardboard waste. It compresses waste into dense bales up to 520kg with a size of 1520×760×1220mm, reducing volume by about 12:1. Easy to operate with manual door opening and auto bale ejection, it saves storage space, transport, and labor costs while meeting safety standards.

Mini Baler / Marine Baler / Multi Purpose Baling Machine


Sinobaler’s Multi-purpose Baler (Mini Baler) is a compact, versatile vertical baler ideal for malls, hotels, offices, hospitals, houses, and vessels, making it popular as a Marine Baler due to its small footprint and height. It meets marine industry needs with standard, waterproof, and explosion-proof versions, helping over 300 vessels reduce waste storage and disposal costs by up to 60%. This baler handles soft waste like cardboard, paper, cans, bottles, and film, with 10–20 tons press force, up to 800×600×800mm bale size, 20–100kg bale weight, and 12:1 compaction ratio for easy storage and transport.

Closed-Door Auto Tie Baler


Our Closed-door fully automatic horizontal baler is designed for efficient and high-performance baling of a wide range of waste materials, including cardboard, paper, film, bags, bottles, etc., perfectly suited for both professional recycling companies and in-house waste management. Attributed to its door-equipped chamber, the baler produces exceptionally dense and uniform bales, optimizing storage and transportation. The fully automatic tying system ensures high efficiency and significantly reduces labor costs, making it an ideal solution for operations seeking to maximize productivity while minimizing manual handling.

PRIVACY POLICY

We collect information from you when you fill out an inquiry or contact form.  When submitting the form on our site, you may be asked to enter your name and contact details such as: e-mail address, mailing address and/or phone number, etc. Alternatively, you can choose not to complete our forms and visit our site anonymously.  Any of the information we collect from you may be used to help us to better respond to your individual needs, and/or enable us to more effectively respond to your customer service requests and support needs.  The email address you provided may also be used to send you information and updates pertaining to your inquiry and/or order, in addition to receiving occasional company news, updates, related product or service information, etc. SINOBALER does not sell, trade, or otherwise transfer to outside parties your personally identifiable information. This does not include trusted third parties who assist us in operating our website, conducting our business, or servicing you, so long as those parties agree to keep this information confidential. We may also release your information when we believe release is appropriate to comply with the law, enforce our site policies, or protect ours or others rights, property, or safety.

 

By using our site, you consent to our online privacy policy.  If we decide to change our privacy policy, we will post those changes on this page.  If you have any questions or concerns regarding our privacy policy, please e-mail info@sinobaler.com or mail your question to us at 1206 Yinzhou Shanghui Nan Lou, 1299 Yinxian Avenue, Yinzhou District, Ningbo 315192, P.R. China.

 

EXTERNAL LINKS & DISCLAIMER

Our web site has links to many other organizations with their permission. Upon leaving the SINOBALER web site, you are subject to the privacy policy of the new site which are not under our control. SINOBALER is not responsible for the content of any linked site or any link contained in a linked site.  These links are provided to you as a service for you to better understand the different business relationships that SINOBALER has established, and/or to point the reader to other possible relevant resources.